Rock-Tred News

×

Error message

Deprecated function: The each() function is deprecated. This message will be suppressed on further calls in menu_set_active_trail() (line 2407 of /home/host2i5/rocktred.com/includes/menu.inc).
 
logo
 
 
 
Rock-Tred

 News

 
 
 
Defining Excellence Since 1939
 
 
 
 
 
 
 
 
HERE WE GROW AGAIN!
 
Rock-Tred is proud to announce our affiliation with two new independent Rep agency’s to promote our product line.
 
DON JOHNSON - SALES RESOURCES
Sales Resources based in Marietta, GA is responsible for the entire State of Georgia. Their principal is Don Johnston. They join TEAM Rock-Tred with over 30 years experience in construction based building materials, including industrial coatings.

 

Contact Don:
  phone: 404-964-0001  |      fax: 770-565-6246  |      e-mail: sr1don@yahoo.com

 

ED GREEN - SATC - ALL THINGS CONCRETE
SATC-All Things Concrete has become Rock-Tred’s Rep firm that will cover IN, OH, KY, W. VA and W. PA. Their principal is Ed Green who has 25+ years in both the installation of industrial coatings, but all the distribution and direct sales.

 

Contact Ed:
  cell: 219-405-3317  |     office phone: 574-653-3465  |      e-mail: egreen@rocktred.com

 

 
 
 
Our Rock-Tred Institute classes continue to have fantastic reviews from attending coating contractors. Check out what they had to say about our last two classes!
 
 
 
 
 
 
 
Contractors Corner
 
Selecting the Right Top-Coat
by Mike Lenk, VP of Sales
 
The two most critical components of any successful coatings project are the surface preparation and selecting the right top coat. Like building a house a solid foundation (good surface prep) and a quality roof to prevent leaking and damage (selecting the right top coat) will insure success for years to come.

 

The two most critical components of any successful coatings project are the surface preparation and selecting the right top coat. Like building a house a solid foundation (good surface prep) and a quality roof to prevent leaking and damage (selecting the right top coat) will insure success for years to come.

 

Not with ROCK-TRED! We offer twelve (12) different top coats for your customer’s needs. Whether it is harsh chemical attack, heavy potential for abrasion/scratch resistance, high-intensity Ultra Violet (U.V.) exposure or just normal foot traffic, we have the right top coat solution for you!

 

Chem-Rock LV & MV: These two products are the “work-horse” 100% solids epoxy products that provide good resistance to moderate chemical attack (such as in residential garages and light manufacturing) and good U.V. tolerance to help maintain clarity in the coating and stability in the system below.

 

Chem-Rock-Ultra U.V.: By far the most contractor friendly 100% solids U.V. resistant epoxy top coat on the market today. Designed for indoor areas with higher than normal U.V. exposure such as atriums, showrooms, etc., this formulation allows contractors plenty of working time and has been tested against over 12 of the leading brands in an ultra violet QUV testing chamber and has yet to be surpassed.

 

P-50/P-100/P-200: Our fastest growing segment of sales so far in 2015! Polyaspartic formulations offer a hybrid of the best performance characteristics of epoxy and polyurethane. Our 3 formulations allow contractors to choose the right polyaspartic coating for their job. ROCK-TRED manufactures a slower version (P-50) which is GREAT for warmer conditions and those who have never installed polyaspartic products, a standard version (P-100) for normal to cool conditions and a low temp version (P-200) for cold applications down to zero degrees.

 

Chem-Thane WB Gloss, Satin or Matte: The water-borne urethanes are extremely hard, extremely abrasion and U.V. resistant. When Chem-Thane WB Gloss is used as a top coat on vertical or floor coating systems its stain resistance makes the surface virtually “graffiti proof”. The high yield per gallon makes this product line an economical and superior choice for high abrasion situations.

 

Chem-Thane 509/Chem-Thane 509 Satin: these two products are ideal when high abrasion and chemical resistance are what your customer is looking for.

 

Novo-Poxi: Where elevated heat and or chemical attack from solvents, acids or bases are an issue this high density novolac coating offers outstanding long-term protection.
 
 
 
 
Have a coating problem? Looking for a solution? Our new Systems and Solutions Brochure is sure to help!
 
The Rock-Tred Systems Brochure provides solutions for the industry's most common problems. From decorative to cold tempurature systems, Rock-Tred has a solution!
 
 
 
 
 
MasterWorks Program
Open the Door to a World of Opportunities with Exclusive MasterWorks Growth-Driving Programs